CHNMAX


Availability:

Quantity:

Inquire Add to Basket

CHNMAX^® is high quality UHMWPE rope product used for most demanding mooring, towing and lifting applications. The advanced equipment and the mature technology in rope manufacturing account for its high quality and stability.

CHNMAX^®rope is your optimal choice for diversified mooring applications for its properties of high strength, excellent abrasion resistance, high strength-to-weight ratio, extremely low elongation and superior flex fatigue resistance.

Product Description

Characteristics

Material: UHMWPE
Construction: 8/12 Strands
Specific Gravity: 0.97, Floating
Melting Point: 150℃
Elongation: 3-4%
Easy to Handle, Inspect and Repair
Non-Rotating and Anti-Kinking
Dry & Wet Conditions: Wet Strength Equals Dry Strength
Abrasion Resistance: ★★★★★
Chemical Resistance: ★★★★
UV Resistance: ★★★★★
Coating: Rope Protection Adhesive XLRP-23 Series, Longer Service Life

Dia	Circ	Linear Density	MBL(KN)
mm	ins	Ktex	Unspliced Rope	Eye-spliced Teminations
20	2-1/2	233	380	340
24	3	331	520	470
26	3-1/4	386	600	540
28	3-1/2	445	685	615
30	3-3/4	508	775	700
32	4	575	865	780
34	4-1/4	646	965	870
36	4-1/2	722	1070	965
38	4-3/4	801	1175	1060
40	5	884	1285	1155
44	5-1/2	1062	1525	1375
48	6	1255	1775	1600
52	6-1/2	1464	2045	1840
56	7	1688	2330	2095
60	7-1/2	1928	2635	2370
64	8	2183	2950	2655
68	8-1/2	2453	3285	2955
72	9	2738	3635	3720
80	10	3353	4375	3940
96	12	4762	6040	5435

General

Coil Length: 220M (length can be customized)
Colors: yellow, blue, red etc (customized at your requests)
Spliced Strength: 10% Lower
Weight and Length Tolerance: 士5%
Physical properties are in accordance with high modulus polyethylene fiber ropes international standard ISO 10325:2018

Mooring Mainline Specification (MEG4)

DIA(mm)	LDBF(mt)	LD(kg/m)	LBLD(kg/m)
24	47.96	0.331	0.331
26	55.10	0.386	0.386
32	79.59	0.575	0.575
36	98.47	0.722	0.722
40	117.86	0.884	0.884
44	140.31	1.062	1.062
48	163.27	1.255	1.255
52	187.76	1.464	1.464
56	213.78	1.688	1.688
64	270.92	2.183	2.183

Mark

LDBF: Line Design Break Force
LD: Linear Density
LBLD: Load Bearing Linear Density
The product has been manufactured, tested following the guidelines in appendix B of the mooring equipment guidelines, Fourth edition (MEG4 2018).